Focusing motor for Baader Steeltrack / Diamondtrack focusers

Description

🌌 Stepper Motor with Integrated Gearbox – For Baader Steeltrack & Diamondtrack Focusers

This stepper motor features an integrated 1:20 gearbox and a bracket specifically designed for Baader Steeltrack and Diamondtrack focusers, delivering precise focusing control for visual and astrophotography use.

⚙️ Technical Data & Recommended Settings:

• Resolution: ~1 µm per step
• Maximum voltage: 12V DC
• Maximum current: 400 mA
• Maximum speed: 400 steps/sec
• Recommended: 250 mA, 300–350 steps/sec, unipolar type, 0.0 s acceleration, 0% hold torque

📦 In the Box:

• Focusing motor with enclosure and RJ12 6-pin socket
• Fixing bracket for Steeltrack/Diamondtrack focusers
• Toothed belt
• Optional RJ12 6-pin focusing cable

🔩Installation:

1. remove screw 1, loosen screw 2, loosen screws 3
2. tilt the focuser motor enclosure and put the toothed belt on
3. tilt the enclosure back, insert screw 1, and tighten screws 1 and 2
4. move the stepper inside the enclosure to set proper tension to the toothed belt (not much) and tighten screws 3