Description
AstroLink 4 Pi device is a standalone astrophotography setup controller based on Raspberry Pi 4. Connect to a 12V DC power supply, attach your setup peripherals, and you are ready to work! AstroLink 4 Pi has several modules already inside, so you do not need additional controllers: the focusing motor controller is there, so you can connect your own or one of our motors. DC power switch to distribute 12V power to your equipment is present. Regulated outputs for dew heaters are also already there. Additional regulated voltage output to power DSLR or USB hub is available. And last but not least selection of sensors can be connected to AstroLink 4 Pi: temperature/humidity, sky temperature/cloud coverage, and sky brightness sensor as well.
AstroLink 4 Pi works under the control of the astroberry system or StellarMate OS system, and a dedicated INDI driver is used to cover all functionalities you need.
Visit this link to purchase AstroLink 4 Pi with preinstalled Raspberry Pi* 4 module.
AstroLink 4 Pi product detail page with downloads and manuals
Check the products overview page if you are looking for something else https://shop.astrojolo.com/products-overview/
Version details are below:
Feature | version 2 | version 3 |
---|---|---|
Focusing motor current adjustment | in the INDI driver panel | in the INDI driver panel |
Real time clock with battery | included | included |
Sensor support | temperature only | temperature, humidity, cloud coverage, sky brightness |
Voltage regulation | inside the enclosure | available from the outside |
In the box:
- AstroLink 4 Pi device
- XT60 female plug for custom power supply adaptation
Raspberry Pi 4 module is not included – the complete set is available here.
* Raspberry Pi is a trademark of Raspberry Pi Trading
Reviews
There are no reviews yet.